CO2 Laser skin rejuvenation beauty equipment

1. Fractional laser for skin rejuvenation,pigment removal
2.co2 laser
3.laser equipment
4.beauty equipment
5.freckle removal
Fractional CO2 laser beauty machine eAngel601
Theory
Through Ultrapulse Fractional CO
2
Laser emitter, the micropulsed laser beam shooting on target skin in nano level to achieve a controllable and precise treatment, the dimension of shooting area only can be measured in nanometer, the energy of Ultra-pulse Fractional CO
2
Laser is even and steady, Its focused energy aims only at target tissue without any injury to surroundings. During the scan treatment, surrounding tissue of the shooting area plays a role as the “bridge” or “carrier” to share and diffuse the over heat produced by micro pulsed laser beam so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery, after exfoliation of the tiny scar, fresh and smooth skin can be regenerated.
Application
1. Skin renewing and resurfacing;
2. Wrinkle removal , skin tightening;
3. Acne and acne scar removal;
4. Restoring burn scars and surgical scars, etc;
5. Remove intractable chloasmas and pigmentation;
6. Restoring the skin of sun damaged.
Features
1. Particular designed intelligent laser control system ensures a precise treatment.
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment.
4. Easy and fast treatment, no down time.
5. ABS material case, green metallic paint, make machine look elegant.
Specification
Laser mode: Low-valance mode
Wavelength: 10600nm, far-infrared laser
Control system: Touching switch, microprocessor-controlled
Display: 8.4inch true color touch screen
Pulse power:40W adjustable
Pulse frequency:33.3Hz
Working mode: Continuous, single pulse, Repeat pulse and super pulse
Scan Graphics: square, rectangle, round, linearity, hexagon, triangle, ellipse
Pulse energy: 10mj to 130mj is optional for each dot
Laser apparatus: Sealed off laser device
Condenser focus : f=100mm
Spot size:0.1mm adjustable
Distance:0.1-2.6mm
Pulse duration:0.1-10ms
Pulse delay:1-5000ms
Interval:0-6s
Overlap:1-20 time
Aiming beam: Less than 2mW, 635nm red semiconductor laser
Cooling system: Closed loop circulating water
Beam transport device: Articulated arm with 7-joint and balance weight
Environment temperature: 5-40C
Temperature in transit: -40-50C
Relative humidity: <80%
Atomospheric pressure:86.0kkpa-106.0kpa
Voltage: 220V/110V
Machine Size:45*50*127cm
Net weight:45kgs